FAST REVERSE
Press this key for fast backward search. You can select the speed of 2X, 4X, 8X, 20X.
FAST FORWARD
Press this key for fast forward search. You can select the speed of 2X, 4X, 8X, 20X.
SKIP BACKWARD
Press this key to skip to the previous chapter or song.
SKIP FORWARD
Press this key to skip to the next chapter or next song.
MUTE
Press this key to mute the audio. Press again to unmute the audio.
PITCH ADJUSTMENT
Press the Pitch + or Pitch - on the remote control to adjust the pitch setting.
5. SETUP AND INSTALLATION
5.1AC Operation
1.Turn all of the volume controls to their minimum setting.
2.Insert the DC plug, at the end of the AC adapter cord into the DC input jack.
3.Plug the AC adapter into AC power outlet socket. Use only with the included power adapter and make sure the local voltage cor- responds on the adapter’s required AC input voltage.
4.Turn on the power switch.
NOTE: If the AC plug of this unit does not fit in your AC outlet, a plug adapter (not supplied) should be used.
5.2Battery Operation
1.To enable battery operation, first ensure that the internal battery is fully charged. To do this, follow the instructions above for AC Operation and let the battery recharge for at least 7 hours.
2.When the battery is charging, the CHG LED will light red. It will turn green when the battery is fully charged.
califone.com
6. BASIC OPERATION
6.1Remote Control
Before the first use, open the battery cover, located on the back of the remote control. Remove the protective plastic film. The remote is now ready for use.
•The remote control may be used to operate the PA419 within
13 feet (4 meters) from the front or rear of speaker, within a 45 degree angle.
•The remote control battery should last for about a year. When the remote ceases to work, it may be time to change the battery. Open the remote control battery cover and replace the old battery with a new CR2025.
6.2Control Panel
Microphone Input (MIC IN)
Connect a microphone to the microphone input jack. The Microphone Volume is used to control the level of the input signal.
Music/Speech
Press this button to change the microphone input setting. When button is up, it is set to speech and should be used when a microphone is connected to the input. When connecting a sound source (such as an external media player, the button should be set in the down position to enable full bandwidth music playback.
Line In (AUX IN)
Connect to the aux input jacks using RCA or 3.5mm plugs. The Aux Volume is used to control the level of the input signal.
Line Out (LINE OUT, VIDEO OUT)
RCA jacks are used to connect to the input of another piece of equipment such as a stereo, mixer or another amplified speaker. The line outputs are independent of the Master Volume control.
Voice Priority
This feature is used for voice override of the music program when using any microphone. The “ducking” circuit attenuates the music when a person speaks into the microphone. After a 3 second delay in the speech, the music returns to the previous level. Note: This function does not affect the iPod/iPhone audio output.
califone.com
8 | 9 |
