Campbell Hausfeld Model CP5101, Important Safety Information Continued, Tool Use and Care

Model CP5101

Important Safety Information (Continued)

d.Keep clear of nozzle. NEVER direct high pressure spray at a person, animal, or yourself.

e.Never put hand or fingers over the spray tip while operating the unit.

f.Never try to stop or deflect leaks with any body part.

Ensuring that the tool is used only when the operator and all

other personnel in the work area are wearing ANSI Z87 eye protection equipment, and when required, other appropriate protection equipment such as head, hearing protection, gloves, rubber boots, protective clothing when operating and performing maintenance. Serious eye or permanent hearing loss could result.

Electrical Safety

Grounding Instructions

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Improper connection of equipment- grounding conductor can result in

a risk of electrocution. Check with a qualified electrician or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the product - it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use any type of adaptor with this product.

Risk of electrocution:

a.This product is provided with a ground fault circuit interrupter, GFCI, built into the power cord plug. Be sure to inspect cord and GFCI prior to use. Any repair or replacement of the power cord must be performed by a qualified (licensed or certified) electrical technician. If replacement of the plug or cord is needed, use only identical replacement parts.

b.Never use an extension cord with this product.

c.Connect only to properly grounded outlet. Do not remove ground pin.

d.Inspect cord before using - Do not use if cord is damaged.

e.Keep all electrical connections dry and off the ground.

f.Do not touch plug with wet hands.

g.Do not spray electrical apparatus and wiring.

Tool Use and Care

Do not use pressure that exceeds the operating pressure of any of the parts (hoses, fittings, etc.)

in the pressurized system. Ensure all equipment and accessories are rated to withstand the maximum working pressure of the unit.

a.Maintain the tool with care. A properly maintained tool reduces the risk of problems and is easier to control.

b.Ensure safety devices are operating properly before each use. DO NOT remove or modify any part of the gun or unit.

c.Never operate the machine without all components properly connected to the machine (handle, gun/wand assembly, nozzle, etc.).

d.Point gun in safe direction. Unit will start spraying when trigger is squeezed if “On/Off” switch is in “ON” position.

e.Know how to stop this product and bleed pressure quickly. Be thoroughly familiar with the controls.

f.Always engage the trigger safety latch in the safe position when spraying is stopped even if only for a few moments.

g.Never permanently engage the trigger mechanism on the gun.

h.Always follow detergent manufacturer’s label recommendations for proper use of detergents. Always protect eyes, skin, and respiratory system from detergent use.

i.Never disconnect the high pressure discharge hose from the machine while the system is pressurized. To depressurize machine, turn power and water supply off, then press the gun trigger 2-3 times.

j.Unplug unit when not in use.

k.Follow the maintenance instructions specified in the manual.

Equipment damage:

l.ALWAYS turn water supply “ON” before turning pressure washer “ON.” Running pump dry causes serious damage.

m.Do not operate the pressure washer with the inlet water screen removed. Keep screen clear of debris and sediment.

n.NEVER operate pressure washer with broken or missing parts. Check equipment regularly and repair or replace worn or damaged parts immediately.

o.Use only the nozzles supplied with this machine.

p.Never leave the wand unattended while the machine is running.

q.Always hold gun and wand firmly when starting and operating the machine.

r.NEVER allow the unit to run with the trigger released (off) for more than one minute. Resulting heat buildup will damage the pump.

s.NEVER store the pressure washer outdoors or where it could freeze. Freezing temperatures can seriously damage the pump.

www.chpower.com 5