Section 1. Preparation and Siting

Step ladder (6')

Datalogger prompt sheet (Section 6)

Station manuals

Station log and pen

Open end wrenches: 3/8", 7/16", ½", (2) 9/16"

Socket wrench and 7/16" deep well socket

Adjustable wrench

Pliers

Conduit and associated tools (as required)

Felt-tipped marking pen

Claw hammer

Pipe wrench (12")

CM6/CM10

Tape measure (12')

Level (12" to 24")

Teflon tape or pipe dope

UT10

Tape measure (12' to 20') 3/8" nut driver

Level (24" to 36") Teflon tape or pipe dope

(12)1/4" washers (for the 015 Crossarm stand only) Allen wrench set

UT30

Tape measure (12' to 20') 3/8" nut driver

Level (36" to 48") Pliers Climbing harness Hard hats

50' haul rope Crescent wrench Channel-lock pliers

1/4" washers (spacers for U-bolts) 5/64" Allen hex wrench

1.2.3 Supplies for Power and Communications Options

AC Power

Wire, conduit, and junction boxes as needed

Phone Modem

Hayes compatible calling modem for PC

Phone line to weather station or junction box

Short-Haul Modem

4 Conductor communications cable from PC to weather station or junction box 6' copper ground rod and clamp for PC surge protection (optional)

1-4