■ BEFORE YOU BEGIN ... ■
About operation modes
The following operating modes are available with this scanner. Select one of the following modes according to your system envi- ronment before using the scanner. For details, contact your ser- vice representative.
❏Scanner mode
Using this scanner in connection with a personal computer, the image projected on the scanner’s screen can be saved in the PC as image data, or printed out through a printer connected to the PC.
❏DMP mode
By installing the optional DMP board in the scanner and connect- ing it to a
❏Reader-printer mode
Using the CapturePerfect bundled with the MS300II, the scanner that is set to the Scanner mode will operate as if it is set to the DMP mode. The image projected on the scanner’s screen can be printed out directly through a printer connected to the personal computer. In this case, however, the image cannot be saved in the PC as image data.
When the DMP board is installed in this scanner, switch the “DMP mode” and “scanner mode” in the user mode before use. (➞P.40 “USER MODE”)
If the computer is connected with the user mode set to “DMP mode” when the DMP board is installed in this scanner and the MS300II is used as a scanner, the operation panel may not be operable or other prob- lems may occur.
11
MS 300_english.p65 | 11 | 07.5.14, 10:14 |
