■ BEFORE YOU BEGIN ... ■
2. Slide the other lens into the unit.
If you are using the FS Controller I, before you insert the lens, remove the bottom cover of the lens as shown in the illustration. Make sure you keep the cover and install it on the lens again after it is removed from the unit.
3. Turn the light adjustment dial to the left or right to adjust the light intensity of the screen. Adjust the light intensity to the type of lens installed.
Set the light intensity adjustment dial to the same mark that is written on the label of the lens you are using.
Light adjustment dial
Lens Label
18
MS 300_english.p65 | 18 | 07.5.14, 10:14 |
