■ SETTING THE SCANNER ■
Selecting the polarity
This setting selects the film polarity (possitive or negative). Press the Negative/Positive key on the operation panel to select the film polarity.
|
|
|
|
|
| Negative | Prints positive from negative film. |
|
|
|
|
|
| Positive | Prints positive from positive film. |
|
|
|
|
|
| ||
|
|
|
|
| |||
|
|
|
|
| |||
|
|
|
|
| |||
|
|
|
|
| |||
|
| A Auto | Automatically detects the type of film in | ||||
|
|
|
|
|
|
| use and prints a positive image. If you |
|
|
|
|
|
|
| select Auto, the Negative or Positive |
|
|
|
|
|
|
| lamp blinks to tell you which type of film |
|
|
|
|
|
|
| has been detected. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 
) Negative or ( 
) Positive.
Do not use Auto for an image with a grey or light bor- der (where black and white may be difficult to distin- guish), or if you intend to remove the border from the image, trim the image, or define the area on the image with the other keys. If you intend to use these special functions, set Negative or Positive manually.
Brightness adjustment
Adjust the brightness of the image during scanning. The bright- ness can be adjusted automatically (AE) or manually.
Switching the operation modes can be also set in the user mode.
Automatic adjustment
Press the AE key on the operation panel. The AE key lights and the image brightness is adjusted automatically during scanning.
When automatic adjustment is selected, you can make fine adjustment to the brightness through 17 level by pressing the brightness adjustment key (
or 
).
Moving the indicator to the right brightens the image by fine increments, and moving it to the left darkens the image by fine increments.
Manual adjustment
When the AE key is lit, you can use the brightness adjustment key (
or 
) to adjust the brightness of the scanned image. Mov- ing the indicator to the right brightens the scanned image and moving it to the left darkens the scanned image.
In manual adjustment, the brightness can be adjusted through 33 levels, as shown in the figure at left.
35
MS 300_english.p65 | 35 | 07.5.14, 10:14 |
