•The following data is shown in informa- tion view.
Zoom Indicator
Built-in Memory
Display
Macro mode: |
|
|
|
|
|
|
|
| |
Shooting methods: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Flash: |
|
| , |
| , |
|
|
|
|
|
|
|
|
|
|
| |||
Exposure Compensation: |
|
|
|
|
|
|
|
| |
White Balance: | , | , , , | |||||||
Compression: | , | , |
|
|
|
|
| ||
Resolution: | , | , |
|
|
|
|
| ||
•The last on/off setting of the LCD monitor is saved when the power is manually shut off. The camera will automatically restore the LCD monitor to the last setting at startup.
•However, until the battery is replaced, the LCD monitor will not turn on automatically if a low battery caused the power to shut off automatically.
•The image in the LCD monitor will darken when struck by direct sunlight or strong illumination. This does not constitute a malfunction.
Using the Shutter Button
The shutter button features a
Pressing Halfway
Lightly press the shutter button halfway to automatically set the exposure and focus settings. The camera will beep twice and the upper indicator will shine green (red for flash) when the metering is finished.
•The lower indicator will also shine orange when the camera is ready in macro mode.
Pressing Fully
Press the button all the way down to activate the shutter. The beep will sound once. The upper indicator will flash green while the image is being recorded onto the CF card.
•The recorded image will be temporarily stored in the camera’s
28 
