Cannon PS1025 manual Shoot the first frame

3Shoot the first frame.

•Press the SET button again if you wish to change the image arrangement setting.

•The settings for the exposure and white balance are locked at the values used for the first image.

4Shoot the second image so that it overlaps the first.

•Horizontal Example

• 2 x 2 Example

•Pressing the // / buttons returns the display to the previously captured images so that you can rerecord an image.

5Repeat the previous steps to record additional frames.

•A maximum of 26 images can be recorded in either the horizontal or vertical direction.

6Press the SET button after the last image has been recorded.

•Minor discrepancies in the overlapping portions can be corrected when the images are stitched together.

•The zoom, flash on/off, exposure compensation, white balance and resolution settings can only be set for the first image in the series.

•The digital zoom, image quality (gain, sharpness and contrast) and continuous, auto flash, red-eye reduction, AE lock, and exposure metering modes cannot be adjusted in this mode.

•A TV cannot be used as the viewfinder in this mode.

40