Canon DC301, 310, DC311 Inserting and Removing a Disc, LCD Backlight, Inserting the Disc, tested

Models: 310

1 87
Download 87 pages 22.81 Kb
Page 23
Image 23
LCD Backlight

yourself in the picture when recording with the self timer.

180°

Subject can monitor the LCD screen

Hold DISP. pressed down for more than 2 seconds. NOTES

About the LCD and viewfinder screen: The screens are produced using extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction.

LCD Backlight

You can set the brightness of the LCD screen to normal or bright.

Hold DISP. pressed down for more than 2 seconds.

Repeat this action to toggle between the normal and bright settings.

Inserting and Removing a Disc NOTES

This setting does not affect the brightness of the recording.

Using the bright setting will shorten the effective usage time of the battery pack.

Inserting and Removing a Disc

Use only 8 cm mini DVD discs marked

with the DVD-R tested (  4). logo (including

DVD-R DL) or the DVD-RW Inserting the Disc logo. Refer also to Discs that have been

tested ( 1Turn the  switch to ON to set the camcorder in  mode. 4).

Before inserting the disc be sure to check that the recording surface is clean. If necessary, use a soft lens- cleaning cloth to remove any fingerprints, dirt buildup or smudges from the disc surface.

Inserting the Disc

( Manual background 18)

Pick up lens

1Turn the Manual background switch to ON to set the camcorder in Manual background mode.

2Slide OPEN fully in the direction of the arrow and gently open the disc cover completely until it stops.

Preparations • 23

Page 23
Image 23
Canon DC301, 310 Inserting and Removing a Disc, LCD Backlight, Hold DISP. pressed down for more than 2 seconds, tested