Cannot edit my recordings or add recordings to the disc with the DVD device.
-It may not be possible to edit or add recordings with an external DVD recorder on a disc recorded with this camcorder.
Memory Card Operation
Memory card cannot be inserted.
-Memory card is not facing the correct direction. Turn the memory card over
and reinsert it ( 
25).
Cannot record on the memory card.
-Memory card is full. Erase still images
( 
52) to free some space or replace the memory card.
-Memory card was not initialized.
Initialize the memory card ( 
56).
-The folder and file numbers have reached their maximum value. Set
[FILE NOS.] to [RESET] ( 
65) and insert a new memory card.
-The
Memory card cannot be played back.
-Set the camcorder to 
mode
( 
50).
Image cannot be erased.
-Image is protected. Cancel the
protection ( 
55).
-The
appears in red.
-A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory
card ( 
56) if the icon still appears in red.
List of Messages (in alphabetical order)
CANNOT ENTER THE 
STANDBY MODE NOW
-The camcorder cannot enter the Quick
Start standby mode ( 
29) while the disc is being recognized after it was inserted or if the remaining battery charge is too low.
CANNOT PLAY BACK
-The disc is dirty or you attempted to play back a disc type not supported by this camcorder (not
-This message can also appear if condensation has formed. Wait until the camcorder dries completely before
resuming use ( 
76).
CANNOT READ THE DISC
CHECK THE DISC
-Disc could not be read. Try cleaning it
or replace the disc ( 
74).
-This message can also appear if the camcorder has exceeded its operational temperature. Turn off the camcorder and let it cool down before resuming use.
-This message can also appear if condensation has formed. Wait until the camcorder dries completely before
resuming use ( 
76).
-The disc may not be loaded correctly. Try removing the disc and reinserting it
( 
23).
•CANNOT RECORD
•CANNOT RECORD
CHECK THE DISC
-There is a problem with the disc.
Replace the disc ( 
23).
-This message can also appear if condensation has formed. Wait until the camcorder dries completely before
resuming use ( 
76).
-The disc’s recording surface may be dirty or scratched.
-This message may appear when the camcorder is repeatedly subject to vibration.
