TO RUN THROUGH THE STILL IMAGES
Push the joystick ( ) and hold it pressed down to run quickly through the still images.
TO SKIP 10 OR 100 STILL IMAGES
1If the joystick guide does not
appear on screen, press to display it.
2 Push the joystick ( ) toward .
3Select ( ) [ JUMP 10 IMAGES]
or [ JUMP 100 IMAGES].
4Jump ( ) the number of images
selected and press .
You can press again to hide the joystick guide.
IMPORTANT
•Observe the following precautions while
the card access display ( ) appears on screen, and when the CARD access indicator is on or flashing. Failing to do so may result in permanent data loss.
-Do not subject the camcorder to vibrations or strong impacts.
-Do not open the memory card slot cover and do not remove the memory card.
-Do not disconnect the power source or turn off the camcorder.
-Do not change the position of the
/ switch or the operating mode.
•The following may not be displayed correctly.
-Images not recorded with this camcorder.
-Images edited on a computer.
-Images whose file names have been changed.
Slideshow
FUNC.
( 19)
FUNC.
[ SLIDESHOW] [START]
•Images are played back one after another.
•Press FUNC. to stop the slideshow.
Index Screen
1Move the zoom lever toward W. The still images index screen appears.
2Select (, ) an image.
•Move the green selection frame to the image you want to view.
•If you have a lot of still images, you may find it easier to browse entire index pages instead. Move the zoom lever toward W to extend the green selection frame to the whole
page, and move ( ) between index pages. Move the zoom lever toward T to return to moving between single images.
3 Press .
The index screen closes and the selected image is displayed.
Photos • 51