SYSTEM SETUP
Menu item
Setting options
CAMERA
PLAY
[SPEAKER VOL.] |
|
|
|
|
| – | – | z | – | – |
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
[BEEP] | [ |
| HIGH VOLUME], |
| z | z | z | z | – | |
| [ |
| LOW VOLUME], [ | OFF] |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
[POWER SAVE] | [ |
| ON], [ | OFF] |
| z | z | z | z | – |
|
|
|
|
|
|
|
|
|
| |
[ STANDBY OFF] | [ |
| 10 min], [ | 20 min], | z | z | – | – | – | |
| [ |
| 30 min] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
[FILE NOS.] | [ |
| RESET], [ | CONTINUOUS] | – | z | – | – | – | |
|
|
|
|
|
|
|
|
|
| |
[TV TYPE] | [ |
| NORMAL TV], [ | WIDE TV] | z | z | z | z | – | |
|
|
|
|
|
|
|
|
|
|
|
[FIRMWARE] | – |
|
|
|
| – | – | – | z | – |
|
|
|
|
|
|
|
|
|
|
|
[SPEAKER VOL.]: Adjust ( ) the volume of the playback.
[BEEP]: A beep will accompany some operations like turning on the camcorder, the self- timer countdown, etc. It also serves as a warning beep under unusual conditions.
[POWER SAVE]: In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for 5 minutes. Approximately 30 seconds before the camcorder shuts off, the message “ AUTO POWER OFF” will appear.
[ STANDBY OFF]: Select the length of time after which the camcorder will end the standby mode and shut off automatically.
[FILE NOS.]: Select the image numbering method to be used when you insert a new memory card.
Images are automatically assigned consecutive image numbers from 0101 to 9900, and stored in folders containing up to 100 images. Folders are numbered from 101 to 998.
[ RESET]: Image numbers will restart from
[ CONTINUOUS]: Image numbers will continue from the number following that of the last image recorded with the camcorder.
• If the memory card you insert already contains an image with a larger number, a new image will be assigned a number one higher than that of the last image on the memory card.
• We recommend using the [ CONTINUOUS] setting.
[TV TYPE]: In order to display the picture in full and in the correct aspect ratio, select the setting according to the type of television to which you will connect the camcorder.
[ NORMAL TV]: TV sets with 4:3 aspect ratio.
[ WIDE TV]: TV sets with 16:9 aspect ratio.
[FIRMWARE]: You can verify the current version of the camcorder’s firmware. This menu option is usually grayed out.
Additional Information • 65