again the camcorder is ready to start recording within approx. 1 second*, ensuring you do not miss important shooting opportunities.
*The exact time required until the camcorder is ready to start recording may vary depending on the shooting conditions.
(
18)
1 Press QUICK START firmly.
The standby lamp flashes at first while the camcorder is preparing and then stays on when it enters the standby mode.
2When you wish to resume recording, press QUICK START again.
Within approx. 1 second, the camcorder is ready to record.
NOTES
•When you wake up the camcorder from standby mode, the following settings will be changed automatically:
-Manual focus returns to automatic focus (AF).
-Manual exposure adjustment returns to automatic exposure.
-Zoom position returns to full wide angle W.
•The camcorder will shut off if left in standby mode for 10 minutes, regardless
of the [POWER SAVE] setting (
65). You can select the length of time until
STANDBY OFF]
setting ( 
65).
To restore the power if the camcorder
shut off, turn the 
switch toward MODE and release it, or turn the camcorder off and then on again.
•If you perform any of the following actions while in standby mode (while the standby lamp is on), the camcorder will be woken up from standby mode.
-Open the disc compartment cover.
-Change the position of the 
/ 
switch.
-Turn the 
switch toward MODE.
Reviewing and Deleting the Last Scene Recorded
Even in 
mode you can play back the last scene recorded in order to check it. If you are using a
( 
18)
NEXT
1If the joystick guide does not
appear on screen, press 
to display it.
If 
does not appear on the joystick guide, repeatedly push the joystick
( 
) toward [NEXT] to display it.
2Push the joystick ( 
) toward 
.
•The camcorder plays back the last scene (but without sound) and returns to record pause mode.
•While reviewing the scene, select
the 
icon and press 
to return to the recording mode.
30 • Video
