Loading Printing Paper

This section describes the available page size and media type, and how to load paper.

Loading paper

1 Turn on the printer.See “Turning On the Printer” on page 6.

(1)Press the Open button, then open the Paper Feed Tray and Paper Output Tray, and fold the Paper Feed Tray in half.

Note

Pull up the LCD Monitor and adjust its angle in the position where you can see it clearly.

(2)Press the ON/OFF button.2 Flatten the four corners of the paper before loading it.

Note

If paper is curled, gently bend the corners in the opposite direction until the paper becomes flat. See “Paper is curled.” on page 42.

3 Ensure that the Paper Thickness Lever is set to the right.

Note

When printing, set the Paper Thickness Lever to the right. Set the Paper Thickness Lever to the left only if ink smudges or the printed surface is stained. Return the Paper Thickness Lever to the right after printing.

4 Load the paper.Do not load higher than the Paper Guide’s thickness.(1) Load the paper into the Rear Traywith the print side facing up.If you use Canon genuine 4" x 6" /101.6 x 152.4 mm paper, up to 20sheets of paper can be loaded. (2) Align the paper stack with the right edge of the Rear Tray.(3)Slide the Paper Guide against the left side of the paper stack.
z Photo stickers

z 4" x 6" or Card

Shorter margin

Important

Always load paper in portrait orientation.

8Loading Printing Paper