„Printable Image Data

This printer supports JPEG and TIFF images created by DCF ver. 1.0/2.0 standard compliant digital cameras (Exif ver. 2.2/2.21 compliant).

Important

Compatible image types are limited to JPEG and TIFF only. Other image or movie types such as RAW images cannot be printed.

„Inserting the Memory Card

This printer is equipped with two Card Slots to meet various types of memory cards. Refer to the illustration on right column to find the Card Slot that corresponds to your memory card. Check the card face and insert it gently until it reaches the bottom and the Access lamp turns on. The card’s end protrudes from the Card Slot even if it is correctly set.

You can also use the Card Slot as the memory card drive of the computer.

Note

zWhen Read/write mode is selected in Read/write attribute under Device settings by using the Operation Panel on the printer, card direct printing cannot be done. After using the Card Slot as the memory card drive of the computer, remove the memory card, then be sure to set Read/write attribute to Read-only mode. See “Changing the Printer Settings” on page 33.

zWhen you use a computer to edit or process photos saved on a memory card, be sure to print them from the computer. If you print using the Operation Panel, the data may not be printed correctly.

1Turn on the printer.

See “Turning On the Printer” on page 6.

2Attach a card adapter if your memory card requires one.

Caution

When using miniSD Card, microSD Card, xD-Picture Card, MEMORY STICK Duo, MEMORY STICK PRO Duo, or RS-MMC, be sure to use a card adapter when inserting these cards into the Card Slot.

If one of these cards is inserted without an adapter, you may not be able to remove the card. In this case, see “Cannot Remove a Memory Card” on page 46.

3 Insert only one memory card into the Card Slot.

Caution

zWhen a memory card is inserted into the Card Slot, the Access lamp is lit. When this Access lamp is flashing, the printer is accessing to the memory card. In this case, do not touch around the Card Slot.

zThe memory card will stick out of the Card Slot, but do not force it into the slot any further. Doing so damages the printer and the memory card.

zMake sure that the memory card is correctly oriented and labeled side is facing up before inserting it into the Card Slot. If you force the memory card into the Card Slot in the wrong orientation, you may damage the memory card and/or the printer.

For SD Secure Digital memory card, SDHC memory card, miniSD Card, microSD Card, MultimediaCard,

MEMORY STICK, MEMORY STICK PRO, MEMORY STICK Duo,MEMORY STICK PRO Duo, and RS- Lights upMMCInsert the memory card into the upper slot with the labeled side facing up.For Compact Flash (CF) card, Microdrive, and xD-Picture CardInsert the memory Lights up card into thedownside slot with the labeled side facing up.4 Confirm that the Access lamp has lit up.

Printing from a Memory Card

11