zDate/File No. Print Setting

You can specify whether the date and/or file number will be printed.

Note

zIf the images already have dates superimposed when shot, set this PictBridge setting item to Off. If you select Date, File No., or Both, the date and/or file number will be printed over the date printed by the device’s function.

zDepending on the paper size and layout, the date will only be printed even when Both is selected.

zImage Optimize Setting

You can select the optimization method to obtain high print quality. When you select Default, the most suitable correction for each photo is made using the Auto image fix function of the printer. See “Setting on the Printer” on right column.

When you select On, photos are optimized for printing using the Photo opt. pro function.

If you are using a Canon-brand PictBridge compliant device, the following additional options may be available, depending on the model.

zVIVID makes green and blue more lively.

zNR (Noise Reduction) reduces the noise on blue areas like the sky as well as on black areas.

zFace brightens a darkened face on the photo taken against the light.zRed-Eyecorrects red eyes in portraits caused by flash photography.

zTrimming Setting

You can select an area to print.

„Settings on the Printer

This section describes how to change the print settings on the printer.

Set the print settings to Default on the PictBridge compliant device when you want to print according to the settings on the printer.

zDisplaying the PictBridge Settings Screen and Specifying the Settings:

1Turn on the printer.

See “Turning On the Printer” on page 6.

2Display the PictBridge settings screen.(1)Select Settings on the HOME screen, then press the OK button.(2)Select Device settings, then press the OK button.(3)Select PictBridge settings, then press the OK button.3Confirm and change the settings.(1)Select the item to set, then press the OK button.(2)Select the item, then press the OK button.(3)Confirm the print settings, select Next, then press the OK button.(4)Select Auto image fix ON or Manual correction, then press the OK button.

When Auto image fix ON is selected, the scene or person’s face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable color, brightness, or contrasts automatically to print.

When Manual correction is selected, you can make each effect setting described in “Setting Items” on page 24. Repeat steps (1) and (2) and then specify each item. After finishing all settings you need, select OK and then press the OK button. You can print from the PictBridge compliant device with specified settings.

Printing Photographs Directly from a Compliant Device

23