Playback Controls

When you play back a clip, operate the buttons on the camcorder’s body or use the joystick and joystick guide to use fast playback, play back frame-by- frame or skip clips. Refer to the following table.

Available Playback Types

Playback type

Operation

 

Buttons: Press the Øor ×button.

Fast playback

Joystick: During playback, push the joystick up or down.

Repeat to increase the playback speed to approximately 5x J

 

 

15x J 60x the normal speed.

 

 

Frame advance/reverse

Joystick: During playback pause, push the joystick up or down.

 

 

Skip to the beginning of

Buttons: Press the Ùbutton.

the next clip

Joystick: Push the joystick right.

 

 

Skip to the beginning of

Buttons: Press the Úbutton.

the current clip

Joystick: Push the joystick left.

 

 

Skip to the previous clip

Buttons: Press the Úbutton twice.

Joystick: Push the joystick left twice.

 

 

 

Return to playback mode

Buttons: Press the Òbutton.

Joystick: Press the joystick itself.

 

 

 

Playback

109

NOTES

•There is no audio during any of the playback types listed in the previous table.

•During some special playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the playback picture.

•The speed indicated on the screen is approximate.

•You can press the DISP. button to turn the joystick guide display on and off.

Adjusting the Volume

During playback, audio will come from the monaural built-in speaker or headphones. When you connect headphones to the ×(headphone) terminal, the built-in speaker will be muted.

1 Open the [Headphone Volume] or [Speaker Volume] submenu.

[¡Audio Setup] >[Audio Output] >[Headphone Volume] or [Speaker Volume]

2 Select the desired level and then press the joystick.

• Select [Off] to mute the audio.

[¡Audio Setup]

[Audio Output]

[Headphone Volume]

[Speaker Volume]

[8]