[~Camera Setup]
[/CINEMA Locked]
[Off]

Recording Video

1Remaining battery time

• The icon shows a rough estimate of the remaining charge as a percentage of the full charge of the battery

pack. When a battery pack compatible with Intelligent System is used, the remaining recording/playback

49

time of the battery pack is displayed, in minutes, next to the icon.

•è é ê ë ì(in red).

When ìis displayed, replace the battery pack with a fully charged one.

•Depending on the conditions under which the camcorder and the battery pack are used, the actual battery charge may not be indicated accurately.

2 SD card status/available recording time

•The following indicates the SD card status.

2/3Can record on SD card

4/5No SD card or cannot record on SD card

The SD card selected for recording is indicated with a Ðmark.

14 Recording operation

ÜREC

Recording

STBY

Record pause

ÜPRE REC

Pre-recording (after pressing the START/STOP button)

PRE REC STBY

Pre-recording (before pressing the START/STOP button)

•When double slot recording (A41) is activated, the 4icon will appear to the left of the operation indicator.

•During continuous recording mode (A85), [CONT] will appear to the left of the operation indicator.

Canon Log Gamma and CINEMA Preset

You can easily set the camcorder to use a number of preset picture- related settings especially designed with professional cinematography and motion picture production in mind. With the CINEMA preset settings, the gamma and color matrix (A95) will be set to the advanced Canon Log setting, which makes full use of the newly developed image sensor to offer spectacular dynamic range. On the other hand, other custom picture settings will not be available.

Clips recorded using Canon Log gamma need to be processed in post-production. During post-production, you can apply a LUT (look-up table) to clips recorded using Canon Log gamma to view the clips with more natural colors. For details about available LUTs, visit your local Canon Web site.

1Open the [/CINEMA Locked] submenu. [~Camera Setup] >[/CINEMA Locked]

2 Select [On] and then press the joystick.

•All picture-related settings will be set according to the CINEMA preset values.

•[/LOCKED] appears on the left of the screen.