[+/Transfer File]
[Copy To *]

Custom Picture Settings

3 Select [Set] and then press the joystick.

4Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom picture settings.

94

Protecting Custom Picture Files

Protecting a custom picture file prevents its settings from being accidentally changed.

1 After selecting a file, open the [Protect] submenu. [/Fine Tuning] >[Protect]

2 Select [Protect] and then press the joystick.

[/Fine Tuning]

[Protect]

•In the custom picture menu, iwill appear next to the file name.

•To remove protection settings, select [Unprotect] instead.

3Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom picture settings.

Transferring Custom Picture Files

You can transfer custom picture files between the camcorder and SD cards. When the custom picture file is in the camcorder, use [Copy To *] or [Load From *] depending on the operation you wish to perform. Similarly, when the custom picture file is on an SD card, use [Copy To Cam.] or [Load From Cam]. Custom picture files cannot be copied directly from one SD card to another.

Copying a File from the Camcorder to an SD Card

1 After selecting a file in the camcorder, open the [Copy To *] submenu. [+/Transfer File] >[Copy To *]

2 Select [*A] or [*B] and then press the joystick.

3Select the file slot on the SD card under which to save the file and then press the joystick.

•If there are available slots, you can select [New File] to save the file in the first available slot. 4 Select [OK] and then press the joystick.

•The currently selected file will be copied to the selected slot on the SD card, overwriting the file in that slot. When the confirmation screen appears, press the joystick.

5Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom picture settings.

Replacing a File in the Camcorder with a File on an SD Card

1After selecting a file in the camcorder to replace, open the [Load From *] submenu.

[+/Transfer File] >[Load From *]

2 Select [*A] or [*B] and then press the joystick.

3 Select the file to transfer to the camcorder and then press the joystick.

[+/Transfer File]

[Load From *]