Menu Options
[Camera Settings]: Resets the white balance, iris, ISO speed, gain, shutter speed, [~Camera Setup] settings and custom picture settings to default settings.
[Assignable Buttons]: Resets the assignable buttons to default settings.
140[Tally Lamp]: Allows you to set whether the front and rear tally lamps illuminate while the camcorder is recording.
[Media Access LED]: Allows you to set whether the respective SD card access indicator illuminates while the camcorder is accessing an SD card.
[Delete Last Clip]: Deletes the last clip you recorded. This menu option will not be available if you turned the camcorder off since recording the last clip.
[HDMI] settings
[Time Code]: Allows you to output the internal
[Rec Command]: After selecting to output the time code, this setting allows you to additionally output also the camcorder’s recording command. When you connect the camcorder to another recording device using the HDMI OUT terminal, if you start or stop recording with the camcorder, the other device will also start or stop recording. The setting cannot be changed while the camcorder is connected to an external device using an HDMI cable (commercially available).
[Reset Hour Meter]: The camcorder has two “hour meters” – the first keeps track of total operation time and the second keeps track of operation time since the last time the second hour meter was reset with this function.
[Firmware]: You can verify the current version of the camcorder’s firmware. This menu option is usually unavailable.
[ | My Menu] ( | mode only) |
|
| |
|
|
|
|
|
|
| Menu item |
| Submenu | Setting options | A |
| [Edit] |
| [Register] | [Cancel], [OK] | |
|
|
|
|
|
|
|
|
| [Move] | [Cancel], [OK] |
|
|
|
|
|
|
|
|
|
| [Delete] | [Cancel], [OK] |
|
|
|
|
|
|
|
|
|
| [Reset All] | [Cancel], [OK] |
|
|
|
|
|
|
|