Onscreen Markers and Zebra Patterns
Grid
69
Center marker
NOTES
•You can turn off all other onscreen displays, leaving only the onscreen markers (A48).
•If you set an assignable button to [Markers] (A89), you can press the button to turn the onscreen markers on and off.
Displaying Zebra Patterns
The camcorder has a zebra pattern feature that shows black and white diagonal stripes over areas that are overexposed. This is displayed only on the screen and will not affect your recordings. There are two types of zebra patterns and you can display both simultaneously. Zebra 1 lets you identify areas within a certain range (±5% of a specified level) while zebra 2 lets you identify areas that are over a specified level. When you display both simultaneously and they overlap, only zebra 1 will be displayed in those areas.
1 Open the zebra pattern [Select] submenu.
[£LCD/VF Setup] >[Select] (under [Zebra])
2 Select [Zebra 1], [Zebra 2] or [Zebra 1&2] and then press the joystick.
3 Open the zebra level submenu.
[£LCD/VF Setup] >[Zebra 1 Level] or [Zebra 2 Level]
4 Select a zebra level and then press the joystick.
5 Press the ZEBRA button to activate the selected zebra pattern.
•Alternatively, before closing the menu, you can also select [Zebra], select [On] and then press the joystick.
[£LCD/VF Setup]
[Select]
(under [Zebra])
[Zebra 1]
NOTES
•You can use the [£LCD/VF Setup] >[Zebra HD Output] setting to display the zebra pattern on an external monitor connected to the HDMI OUT terminal (HD output only).