Specifications
Modular Units
Handle Unit
Modular unit includes a cold accessory shoe and socket for 0.64 cm (1/4 in.) screws for other accessories, built-
164in microphone, XLR terminals and related audio controls.
•CH1, CH2 Terminals
XLR jack (pin1: shield, pin2: hot, pin3: cold), 2 sets
Sensitivity
MIC setting:
LINE setting: 4 dBu (manual volume center, full scale
Microphone attenuator: 20 dB
•Microphone: Stereo electret condenser microphone
•Weight: Approx. 360 g (12.7 oz.)
Grip Unit
Modular unit can be attached at any of 24 positions (15º intervals); includes limited recording controls.
•Weight: Approx. 230 g (8.1 oz.)
•Rated Input: 100 – 240 V AC, 50/60 Hz
Used as power adapter: 46 VA (100 V AC) – 62 VA (240 V AC)
Used as battery charger: 40 VA (100 V AC) – 54 VA (240 V AC)
•Rated Output
Used as power adapter: 8.4 V D , 2.4 A
Used as battery charger: 8.4 V D , 1.5 A/2.0 A
•Operating Temperature: 0 – 40 °C (32 – 104 °F)
•Dimensions (W x H x D): Approx. 85 x 51 x 110 mm (3.3 x 2.0 x 4.3 in.)
•Weight: 240 g (8.5 oz.)
•Battery Type: Rechargeable lithium ion battery, compatible with Intelligent System
•Rated Voltage: 7.4 V DC
•Operating Temperature: 0 – 40 °C (32 – 104 °F)
•Battery Capacity Typical: 5,200 mAh Minimum: 37 Wh / 4,900 mAh
•Dimensions (W x H x D): 38.2 x 43.5 x 70.5 mm (1.5 x 1.7 x 2.8 in.)
•Weight: 220 g (7.8 oz)
Weight and dimensions are approximate. Errors and omissions excepted.
The information in this manual is verified as of April 2014. Subject to change without notice.