Canon 800 manual Before You Begin

Before You Begin...

CAUTIONS

●Do not set up the scanner on sloping, wobbly or otherwise unstable surfaces or in locations affected by excessive vibration. The scanner could cause injury if it falls over or slides off the surface.

●Do not block the ventilation slots as this could result in a fire due to the build up of heat inside the scan- ner.

●Do not place vessels containing liquids (cups, vases, etc.) or small metal objects (paper clips, staples, necklaces, etc.) on top of the scanner. Liquids or metal objects falling into the scanner could cause an electric shock or fire. If any liquids or metal objects fall into the scanner, immediately switch the scanner off, unplug the power cord and contact an autho- rized Canon dealer or service center.

●Do not set up the scanner in dusty or humid locations as this could result in an electric shock or fire.

●Do not place heavy objects on top of the scanner as such objects could fall and cause injury.

●Use only a power supply having the rated voltage. The use of other voltages could result in a fire or electric shock.

●Always unplug the power cord by grasping the plug itself. Pulling on the power cord can damage the cord so that the core wires are exposed or snapped and could cause a fire or electric shock.

●Do not use an extension power cord as this could cause a fire or electric shock.

●Keep the area around the power outlet free of ob- stacles to ensure that the scanner can be unplugged quickly in the event of an emergency.

●Take care not to tip water or flammable solvents such as alcohol, thinners or benzene into the scanner as this could result in a fire or electric shock.

●If the scanner will be left unused for a lengthy period, always unplug the scanner as a safety mea- sure.

●Avoid touching internal scanner components when you perform routine cleaning or maintenance such as changing the lamp. Some internal components generate high temperatures or high voltages. To avoid injury such as burns or electric shocks, take care also that metal objects such as necklaces or bracelets do not come into contact with internal scanner components.

●To avoid injury when you are moving the scanner, take care not to put your hands on the metal protrusions on the underside of the scanner unit.

– 8 –