Canon 800 Preparing the Printer

– 16 –

4Slowly set the lens in the lens holder.

IMPORTANT

When you are fitting a zoom lens, check that the 2

marks on the rim of the lens are matched with the

contacts on the lens holder. These contacts must be

aligned snugly for the scanner to correctly recognize

the zoom lens type. Take care also not to touch the

contacts with your fingers.

5Slide the lens holder back into the main unit, taking care

not to drop the lens.

Push the holder slowly into the bracket until you hear it

click into place.

Preparing the Printer

To use the Microfilm Scanner 800 in ReaderPrinter mode,

a Canon FilePrint 400 printer (sold separately) is required.

Contact an authorized Canon retailer or service technician

for details.

NOTE

Refer to the FilePrint 400 Instructions for informa-

tion on setting up the printer.

Before You Begin...

Canon FilePrint 400

Contents

Main NOTICE Trademarks and Registered Trademarks FCC REGULATIONS (For 120V models) RADIO INTERFERENCE REGULATIONS (For 120V models) RGLEMENT SUR LE BROUILLAGE RADIOLECTRIQUE (For 120V models) Introduction Conventions Used in These Instructions Contents Before Y ou Begin... Safety Notes Choosing a Safe Location Page Page Important Warnings WARNING Page Features Operation Modes Checking the Box Contents Important Components and Their Functions Optional Products Preparing the Carrier Lenses Fitting and Replacing Lenses 1 2 4 Preparing the Printer Connecting to a Computer Connecting the Computer Device Drivers Using the Operation Panel Keys Operation Panel Operation Keyboard (optional) Using the Scanner Switching On 1 2 Switching Off Adjusting the Image Focusing the Image 1 2 1 2 Enlarging and Reducing the Image 1 2 Rotating the Image 1 2 Printing or Scanning the Image Selecting the Polarity Brightness Adjustment Selecting the Paper for Printing 1 2 3 Selecting the Scan Size Setting the Scanning Position Trimming/Border settings Special Features Storing the Lens Magnification Storing a Zoom Setting 1 2 3 4 Function Keys Programming Function Keys 1 2 3 Functions that Can Be Assigned to the Function Keys Page Function Key Labels Add on Setting Setting the Add On 1 2 3 5 6 7 Setting the Caption 1 ...... 2 3 Setting the Date and Time 1 2 3 4 6 7 8 1 Setting the Auto Clear Time 1 2 3 Maintenance and Troubleshooting Replacing the Lamp 1 2 3 4 5 Routine Cleaning Cleaning the Screen and Main Unit Cleaning the Lens 1 2 3 Cleaning Mode Cleaning the Fuser Roller 1 2 3 Troubleshooting Automatic Border Removal and Skew Correction User Call Errors Service Call Errors 1 2 Specifications Main Unit Film Image Adjustment Functions Scanning Index A B C E P R S T U