Before You Begin...
Preparing the Carrier
The list below shows all the optional film carriers that can be installed on the Canon Microfilm Scanner 800. For more details about these optional carriers, consult your Canon dealer or authorized Canon service outlet. For information on carrier installation and operation, refer to the instructions provided with the carrier.
Note
The Auto Carrier 100C, 100M and 100R and the FS Controller I and Roll/Fiche Carrier 200 require the optional installation kit.
Fiche Carrier 190R II
A film carrier for viewing microfiche (up to 105 x 190 mm), jackets and aperture cards.
Auto Carrier 100C (AC100C)
A motorized automatic carrier for 16 mm cartridge film (ANSI, ANSI ENCLOSED *1, Kodak Ektamate or 3M) that features
Auto Carrier 100M (AC100M)
A motorized automatic carrier for 3M cartridges or TUSCAN
Auto Carrier 100R (AC100R)
A motorized automatic carrier for 16 or 35 mm film wound on standard open reels.
FS Controller I
A motorized automatic carrier for 16 mm cartridge film (ANSI, Kodak Ektamate or 3M). This carrier is required for reading film marked with blips for image search and retrieval.
FS Controller III
A motorized automatic carrier for the latest 16 mm car- tridge film (ANSI, Kodak Ektamate or 3M). This carrier is required for reading film marked with blips for image search and retrieval.
Roll/Fiche Carrier 200
This carrier is required for reading 16 or 35 mm standard open reel film, 16 mm cartridge film (ANSI, Kodak Ektamate or 3M), microfiche (up to 105 x 190 mm), jackets or aperture cards.
*1 ANSI ENCLOSED cartridges are as stipulated in ANSI
*2 TUSCAN
– 14 –