![](/images/new-backgrounds/1119814/11981475x1.webp)
+
AE
Setting the Date and Time
When the date and time are added to the scanned image in Reader Printer mode, the date and time added are those set internally on the scanner by this function. This section describes how to set and check the date and time.
●Setting the Date and Time
1Hold down the Clear key and the Negative/Positive key for 2 seconds. The year figure blinks on the display and you can start setting the date and time.
2Check that the lamp at the left end of the brightness indicator is blinking and then press the plus (+) or minus
Display | Setting |
~ | 1951 to 1999 |
~ | 2000 to 2050 |
|
|
3Press the brightness adjustment key () to display the month and then use the plus (+) and minus
set the month.
Display | Setting |
~ | January to December |
|
|
4Press the brightness adjustment key () to display the day and then use the plus (+) and minus
the day.
DisplaySetting
~ | 1st to 31st |
|
|
5Press the brightness adjustment key () to display the time
minus
DisplaySetting
~ | 00 to 23 |
– 36 –