– 33 –
“Add on” Setting
In ReaderPrinter mode, the Add on setting can be used to
specify a time, date or caption to be imprinted on the image
to be printed. Use the function key to select whether the
add on is imprinted on the image actually printed. (➜ P.29
“Function Keys”)
In Scanner mode, the Add on setting is specified from the
application software.

Setting the Add On

Use the procedure below to specify whether a preset cap-
tion (➜ P.35 “Setting a Caption”) or date (➜ P.36 “Setting
the Date and Time”) is to be imprinted on the image and to
set the location of the add on and the format of the date or
time.
1Hold down the function key to which the Add on func-
tion is assigned for 2 seconds to switch to Add on
setting mode.
The number of copies indicator shows the Add on
setting.
NOTE
The left digit in the number of copies indicator shows
whether the date/time is imprinted (1) or not im-
printed (0), while the right digit gives the same
information for the caption.
2Use the minus (-) key to specify the date/time setting
and the plus (+) key to specify the caption setting.
Display Add on
Date/time and caption
Date/time only
Caption only
No add on
3Press the Brightness adjustment key ( ) to switch to Add
on position setting mode. The copies indicator then
becomes the Add on position indicator.
4Use the plus (+) and minus (-) keys to set the position of
the add on.
Display Add On Position
Top-left corner of the page
Top center of the page
Top-right corner of the page
Bottom-left corner of the page
Bottom center of the page
Bottom right of the page