Canon 800 Cleaning Mode

– 42 –

Cleaning Mode

When the toner cartridge in the FilePrint 400 has been

replaced, the FilePrint 400 fuser roller must be cleaned.

This section describes the Cleaning mode used for fuser

roller cleaning. Refer to the FilePrint 400 Instructions for

more information on working with the FilePrint 400.

Cleaning the Fuser Roller

1Hold down the AE key for 5 seconds to switch to

Cleaning mode. “11” or“A4” appears on the copies

display.

2Open the multipurpose tray on the FilePrint 400 and

load a sheet of A4 paper.

3Press the Start key. A cleaning sheet is printed and the

copies display changes to “CL”.

IMPORTANT

To cancel Cleaning mode, press the Clear key before

you press the Start key. You cannot cancel Cleaning

mode once you have printed the cleaning sheet. You

must complete the fuser cleaning procedure.

4Switch the FilePrint 400 to face-up paper eject.

5Load the cleaning sheet in the multipurpose tray with

the printed side down and the arrow marking facing

towards the printer.

6Press the Start key to begin fuser cleaning.

IMPORTANT

Fuser cleaning takes about 2 minutes. Do not touch

the printer during this period as no other printer

operations can be performed.

7Once cleaning has finished, the copies display reverts to

its normal status.

(Cleaning sheet)

(120V model) (220 – 240V model)

Contents

Main NOTICE Trademarks and Registered Trademarks FCC REGULATIONS (For 120V models) RADIO INTERFERENCE REGULATIONS (For 120V models) RGLEMENT SUR LE BROUILLAGE RADIOLECTRIQUE (For 120V models) Introduction Conventions Used in These Instructions Contents Before Y ou Begin... Safety Notes Choosing a Safe Location Page Page Important Warnings WARNING Page Features Operation Modes Checking the Box Contents Important Components and Their Functions Optional Products Preparing the Carrier Lenses Fitting and Replacing Lenses 1 2 4 Preparing the Printer Connecting to a Computer Connecting the Computer Device Drivers Using the Operation Panel Keys Operation Panel Operation Keyboard (optional) Using the Scanner Switching On 1 2 Switching Off Adjusting the Image Focusing the Image 1 2 1 2 Enlarging and Reducing the Image 1 2 Rotating the Image 1 2 Printing or Scanning the Image Selecting the Polarity Brightness Adjustment Selecting the Paper for Printing 1 2 3 Selecting the Scan Size Setting the Scanning Position Trimming/Border settings Special Features Storing the Lens Magnification Storing a Zoom Setting 1 2 3 4 Function Keys Programming Function Keys 1 2 3 Functions that Can Be Assigned to the Function Keys Page Function Key Labels Add on Setting Setting the Add On 1 2 3 5 6 7 Setting the Caption 1 ...... 2 3 Setting the Date and Time 1 2 3 4 6 7 8 1 Setting the Auto Clear Time 1 2 3 Maintenance and Troubleshooting Replacing the Lamp 1 2 3 4 5 Routine Cleaning Cleaning the Screen and Main Unit Cleaning the Lens 1 2 3 Cleaning Mode Cleaning the Fuser Roller 1 2 3 Troubleshooting Automatic Border Removal and Skew Correction User Call Errors Service Call Errors 1 2 Specifications Main Unit Film Image Adjustment Functions Scanning Index A B C E P R S T U