Canon 800 6, 7, 8, 1

– 37 –

6Press the brightness adjustment key ( ) to display the

minutes and then use the plus (+) and minus (-) keys to

set the minutes.

Display Setting

~ 0 to 60 minutes

7Press the brightness adjustment key ( ) to display the

seconds and then use the plus (+) and minus (-) keys to

set the seconds.

Display Setting

~ 0 to 60 seconds

8When you have finished all the date and time settings,

press the Start key to complete the setting procedure.

● Checking the Date and Time

1When you press the Clear key and the Negative/Positive

key, the display changes to show the date and time in

the following sequence: Year ➜ Month ➜ Day ➜ Hour

➜ Minutes ➜ Seconds.

NOTE

The position of the brightness indicator lamp identi-

fies the date/time setting. If the scanner is set to

Scanner mode, the date and time set internally in the

scanner is reset to match the settings in the connected

computer.

Year

Month

Day

Hour

Minutes

Seconds.

Contents

Main NOTICE Trademarks and Registered Trademarks FCC REGULATIONS (For 120V models) RADIO INTERFERENCE REGULATIONS (For 120V models) RGLEMENT SUR LE BROUILLAGE RADIOLECTRIQUE (For 120V models) Introduction Conventions Used in These Instructions Contents Before Y ou Begin... Safety Notes Choosing a Safe Location Page Page Important Warnings WARNING Page Features Operation Modes Checking the Box Contents Important Components and Their Functions Optional Products Preparing the Carrier Lenses Fitting and Replacing Lenses 1 2 4 Preparing the Printer Connecting to a Computer Connecting the Computer Device Drivers Using the Operation Panel Keys Operation Panel Operation Keyboard (optional) Using the Scanner Switching On 1 2 Switching Off Adjusting the Image Focusing the Image 1 2 1 2 Enlarging and Reducing the Image 1 2 Rotating the Image 1 2 Printing or Scanning the Image Selecting the Polarity Brightness Adjustment Selecting the Paper for Printing 1 2 3 Selecting the Scan Size Setting the Scanning Position Trimming/Border settings Special Features Storing the Lens Magnification Storing a Zoom Setting 1 2 3 4 Function Keys Programming Function Keys 1 2 3 Functions that Can Be Assigned to the Function Keys Page Function Key Labels Add on Setting Setting the Add On 1 2 3 5 6 7 Setting the Caption 1 ...... 2 3 Setting the Date and Time 1 2 3 4 6 7 8 1 Setting the Auto Clear Time 1 2 3 Maintenance and Troubleshooting Replacing the Lamp 1 2 3 4 5 Routine Cleaning Cleaning the Screen and Main Unit Cleaning the Lens 1 2 3 Cleaning Mode Cleaning the Fuser Roller 1 2 3 Troubleshooting Automatic Border Removal and Skew Correction User Call Errors Service Call Errors 1 2 Specifications Main Unit Film Image Adjustment Functions Scanning Index A B C E P R S T U