Canon 800 Setting the Auto Clear Time

– 38 –

Setting the Auto Clear Time

The function specifies the time after which the scanner

switches to Standby mode when it is left unused.

1Hold down the Clear key and the Trimming/Border key

for 2 seconds.

2Use the plus (+) and minus (-) keys to select the Auto

Clear time.

3Press the Start key to confirm the setting.

NOTE

The available settings for the Auto Clear time are 0,

3, 15, 30, 60, or 90 minutes. Selecting 0 disables the

Auto Clear function. The available settings for the

Auto Clear time are 0, 3, 15, 30, 60, or 90 minutes.

Selecting 0 disables the Auto Clear function. To

cancel Standby mode, press the key again or press

any other key.

Contents

Main NOTICE Trademarks and Registered Trademarks FCC REGULATIONS (For 120V models) RADIO INTERFERENCE REGULATIONS (For 120V models) RGLEMENT SUR LE BROUILLAGE RADIOLECTRIQUE (For 120V models) Introduction Conventions Used in These Instructions Contents Before Y ou Begin... Safety Notes Choosing a Safe Location Page Page Important Warnings WARNING Page Features Operation Modes Checking the Box Contents Important Components and Their Functions Optional Products Preparing the Carrier Lenses Fitting and Replacing Lenses 1 2 4 Preparing the Printer Connecting to a Computer Connecting the Computer Device Drivers Using the Operation Panel Keys Operation Panel Operation Keyboard (optional) Using the Scanner Switching On 1 2 Switching Off Adjusting the Image Focusing the Image 1 2 1 2 Enlarging and Reducing the Image 1 2 Rotating the Image 1 2 Printing or Scanning the Image Selecting the Polarity Brightness Adjustment Selecting the Paper for Printing 1 2 3 Selecting the Scan Size Setting the Scanning Position Trimming/Border settings Special Features Storing the Lens Magnification Storing a Zoom Setting 1 2 3 4 Function Keys Programming Function Keys 1 2 3 Functions that Can Be Assigned to the Function Keys Page Function Key Labels Add on Setting Setting the Add On 1 2 3 5 6 7 Setting the Caption 1 ...... 2 3 Setting the Date and Time 1 2 3 4 6 7 8 1 Setting the Auto Clear Time 1 2 3 Maintenance and Troubleshooting Replacing the Lamp 1 2 3 4 5 Routine Cleaning Cleaning the Screen and Main Unit Cleaning the Lens 1 2 3 Cleaning Mode Cleaning the Fuser Roller 1 2 3 Troubleshooting Automatic Border Removal and Skew Correction User Call Errors Service Call Errors 1 2 Specifications Main Unit Film Image Adjustment Functions Scanning Index A B C E P R S T U