By registering Image Sync to the <{> button, you can simply press the
<{> button to send any unsent images on the memory card to a computer via CANON iMAGE GATEWAY. For details on Image Sync, see “Sending Images Automatically (Image Sync)” (=108).
1Prepare the camera.
zzRegister [] as the destination (=89).
zzInstall the software on the destination computer, and configure the camera settings (=93).
2 Press the <{> button.
3Choose the destination.
zzPress the <q><r> buttons to choose [], and then press the <m> button.
zzThe camera will automatically reconnect to any previous access points and send the images (=108).
zzFrom now on, you can simply press the <{> button to send images.
zzPress the <n> button, and then choose [Mobile Device Connect Button] on the [3] tab (=21).
zzPress the <q><r> buttons to choose [OK], and then press the <m> button.
zzAfter a confirmation message is displayed, press the <m> button.
• Registered destinations are also cleared when you reset
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
PMode Playback Mode
107