Cannot magnify!/Cannot play back this content in Smart Shuffle/ Cannot rotate/Cannot modify image/Cannot modify/Cannot assign to category/Unselectable image.

The following functions may be unavailable for images that were renamed or already edited on a computer, or images shot with another camera. Note that starred (*) functions are not available for movies.

Magnify* (=71), Smart Shuffle* (=72), Rotate* (=78), Favorites (=79), Edit* (=80 83), Print List* (=133), and Photobook Set-up* (=135).

Grouped images cannot be processed (=43).

Invalid selection range

When specifying a range for image selection (=74, 77, 134), you attempted to choose an initial image that was after the final image, or vice-versa.

Exceeded selection limit

More than 998 images were selected for Print List (=133) or Photobook Set-up (=135). Choose 998 images or less.

Print List (=133) or Photobook Set-up (=135) settings could not be saved correctly. Reduce the number of selected images and try again.

You attempted to choose more than 500 images in Protect (=73), Erase (=76), Favorites (=79), Print List (=133), or Photobook Set-up (=135).

Naming error!

The folder could not be created or images could not be recorded, because the highest supported folder number (999) for storing images on the card has been reached and the highest supported image number (9999) for images in folders has been reached. On the [3] tab, change [File Numbering] to [Auto Reset] (=118), or format the memory card (=117).

Lens Error

This error may occur if the lens is held while it is moving, or when the camera is used in dusty or sandy locations.

Frequent display of this error message may indicate camera damage. In this case, contact a Canon Customer Support Help Desk.

A camera error was detected (error number)

If this error message is displayed immediately after a shot, the image may not have been saved. Switch to Playback mode to check for the image.

Frequent display of this error message may indicate camera damage. In this case, write down the error number (Exx) and contact a Canon Customer Support Help Desk.

File Error

Correct printing (=129) may not be possible for photos from other cameras or images that have been altered using computer software, even if the camera is connected to the printer.

Print error

Check the paper size setting (=131). If this error message is displayed when the setting is correct, restart the printer and complete the setting on the camera again.

Ink absorber full

Contact a Canon Customer Support Help Desk to request assistance with ink absorber replacement.

Wi-Fi

Connection failed

No access points were recognized. Check the access point settings (=95).

A device could not be found. Turn the camera off and on again, and retry the connection.

Check the device you want to connect to and make sure it is ready for connection.

Cannot determine access point

The WPS buttons on numerous access points were pressed simultaneously. Try reconnecting again.

No access points found

Check to make sure that the access point is turned on.

When connecting to an access point manually, make sure that you entered the correct SSID.

Incorrect password/Incorrect Wi-Fi security settings

Check the access point security settings (=95).

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid

Auto Mode

Other Shooting

Modes

PMode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index

142