World ClockTo ensure that your shots will have the correct local date and time when you travel abroad, simply register the destination in advance and switch to that time zone. This convenient feature eliminates the need to change the Date/ Time setting manually.
Before using the world clock, be sure to set the date and time and your home time zone, as described in “Setting the Date and Time” (=12).
1Specify your destination.
zzChoose [Time Zone], and then press the <m> button.
zzPress the <o><p> buttons to choose [
World], and then press the <m> button.
zzPress the <q><r> buttons to choose the destination.
zzTo set daylight saving time (1 hour ahead), choose [
] by pressing the <o><p> buttons, and then choose [
] by pressing the <q><r> buttons.
zzPress the <m> button.
2Switch to the destination time zone.
zzPress the <o><p> buttons to choose [
World], and then press the <n> button.
zz[ ] is now shown on the shooting screen (=144).
• Adjusting the date or time while in [
] mode (=13) will automatically update your [
Home] time and date.
Lens Retraction TimingThe lens is normally retracted for safety about one minute after you press the <1> button in Shooting mode (=18). To have the lens retracted immediately after you press the <1> button, set the retraction timing to [0 sec.].
zzChoose [Lens Retract], and then choose [0 sec.].
Using Eco ModeThis function allows you to conserve battery power in Shooting mode. When the camera is not in use, the screen quickly darkens to reduce battery consumption.
1Configure the setting.
zzChoose [Eco Mode], and then choose [On].
zz[ 
] is now shown on the shooting screen (=144).
zzThe screen darkens when the camera is not used for approximately two seconds; approximately ten seconds after darkening, the screen turns off. The camera turns off after approximately three minutes of inactivity.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
PMode Playback Mode
115