Removing the Battery Pack and Memory Card Remove the battery pack.
zzOpen the cover and press the battery lock in the direction of the arrow.
zzThe battery pack will pop up.
Remove the memory card.
zzPush the memory card in until it clicks, and then slowly release it.
zzThe memory card will pop up.
Setting the Date and TimeSet the current date and time correctly as follows if the [Date/Time] screen is displayed when you turn the camera on. Information you specify this way is recorded in image properties when you shoot, and it is used when you manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish (=32).
1Turn the camera on.
zzPress the power button.
zzThe [Date/Time] screen is displayed.
2Set the date and time.
zzPress the <q><r> buttons to choose an option.
zzPress the <o><p> buttons to specify the date and time.
zzWhen finished, press the <m> button.
3Specify your home time zone. zzPress the <q><r> buttons to choose
your home time zone.
4Finish the setup process. zzPress the <m> button when finished.
After a confirmation message, the setting
screen is no longer displayed.
zzTo turn off the camera, press the power button.
•Unless you set the date, time, and home time zone, the [Date/Time] screen will be displayed each time you turn the camera on. Specify the correct information.
•To set daylight saving time (1 hour ahead), choose [
] in step 2 and then choose [
] by pressing the <o><p> buttons.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
PMode Playback Mode
12