•Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change depending on the zoom range.
-White range: optical zoom range where the image will not appear grainy.
-Yellow range: digital zoom range where the image is not noticeably grainy (ZoomPlus).
-Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution settings (=34), the maximum zoom factor can be achieved by following step 1.
• To deactivate digital zoom, choose MENU (=21) ► [4] tab ► [Digital Zoom] ► [Off].
Still Images | Movies |
Using the With the
1 Configure the setting.
zzPress the <m> button, choose [
] in the menu, and then choose the []] option (=20).
zzOnce the setting is complete, []] is displayed.
2Shoot.
zzFor Still Images: Press the shutter button halfway to focus on the subject, and then press it all the way down.
zzFor Movies: Press the movie button.
zzOnce you start the
zzTwo seconds before the shot, the blinking and sound will speed up. (The lamp will remain lit in case the flash fires.)
zzTo cancel shooting after you have triggered the
zzTo restore the original setting, choose [
] in step 1.
Still Images | Movies |
Using the
This option delays shutter release until about two seconds after you have pressed the shutter button. If the camera is unsteady while you are pressing the shutter button, it will not affect your shot.
zzFollow step 1 in “Using the
zzOnce the setting is complete, [[] is displayed.
zzFollow step 2 in “Using the
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
PMode Playback Mode
31