2Shoot.

zzTo activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway.

Power-Saving Adjustment

Adjust the timing of automatic camera and screen deactivation (Auto Power Down and Display Off, respectively) as needed (=18).

zzChoose [Power Saving], and then press the <m> button.

zzAfter choosing an item, press the <q><r> buttons to adjust it as needed.

•To conserve battery power, you should normally choose [On] for

[Auto Power Down] and [1 min.] or less for [Display Off].

• The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].

• These power-saving functions are not available when you have set Eco mode (=115) to [On].

Screen Brightness

Adjust screen brightness as follows.

zzChoose [LCD Brightness], and then press the <q><r> buttons to adjust the brightness.

• For maximum brightness, press and hold the <p> button for at least one second when the shooting screen is displayed or when in single-image display. (This will override the [LCD Brightness] setting on the [3] tab.) To restore the original brightness, press and hold the <p> button again for at least one second or restart the camera.

Hiding the Start-Up Screen

If you prefer, you can deactivate display of the start-up screen normally shown when you turn the camera on.

zzChoose [Start-up Image], and then choose [Off].

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid

Auto Mode

Other Shooting

Modes

PMode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index

116