Changing Shooting Function Settings 
●Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for postcard size prints.
●Choose [Disp. Overlay], then press the qr buttons to choose an option.
Grid Lines | A grid overlays the display. | |
|
| |
| Gray bars will appear on the top | |
3:2 Guide | and bottom of the display. This | |
area will not print when printing | ||
| ||
| on paper with a 3:2 aspect ratio. | |
|
| |
Both | Both grid lines, and the 3:2 | |
guide will display. | ||
| ||
|
|
•In 
mode, you cannot set [3:2 Guide] or [Both].
•Grid Lines will not be recorded on the image.
• The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas.
●Changing the IS-Mode Settings 
●Choose [IS Mode], then press the qr buttons to choose an option.
| Image stabilization is always on. | |
| You can confirm the result | |
Continuous | directly on the display, which | |
| makes it easier to check the | |
| composition or focus. | |
|
| |
Shoot Only | Image stabilization is only active | |
at the moment of shooting. | ||
| ||
|
| |
| Image stabilization only counters | |
Panning | up and down motion. This option | |
is recommended for shooting | ||
| ||
| objects moving horizontally. | |
|
|
•If camera shake is too strong, attach the camera to a tripod. If you attach the camera to a tripod, you should set the IS Mode to [Off].
• When using [Panning], hold the camera horizontally to shoot. Image stabilization does not work when the camera is held vertically.
123
