Canon A3000 IS, A3100 IS, A3150 IS Changing the Start-up Screen, Registering the Start-up Screen

Changing Camera Settings

●Changing the Start-up Screen

You can change the start-up image that appears on the screen when you turn on the camera.

●Choose [Start-up Image], then press the m button.

●Press the qr buttons to choose an option.

No start-up image.

1Preset images. (cannot be modifed) Preset images.

2You can set recorded images, and use the included software to change the images (p. 117).

●Registering the Start-up Screen

When you press the 1 button and set the camera to Playback mode, you can register sounds and images.

●Choose [Start-up Image], then press the m button.

●Press the qr buttons to choose [2], then press the m button.

●Press the qr buttons to choose an image, then press the m button.

●Press the qr buttons to choose [OK], then press the m button to complete registration.

Any previously registered start-up image will be overwritten when registering a new start-up image.

Register images or sounds with the included software

You can register images or sounds to the camera using the included software. Refer to the Software Guide for details.

117