33..NamesNamesandandFunctionsFunctionsof Partsof Parts

This section describes the name and function of each part. Make sure to read this section and familiarize yourself with the parts of the scanner before using the scanner.

„Front View/Right-Side View

Power Switch

This switch is used to turn the scanner ON and OFF. If you set the switch to [AUTO], the scanner is linked to be automatically turned ON/ OFF in accordance with the power of the computer.

Power Connector

Connect the supplied

USB Connector

Connect a USB cable that supports Hi-Speed USB 2.0 to this connector.

Document Feed Tray Open to place documents.

(See p.20)

Document Eject Area Scanned documents are

output here.

Job Buttons

These buttons can perform user-specified functions assigned with the Job Registration Tool.

(See p.56)

Power Indicator

This indicator lights green when the scanner is turned ON.

AC adapter to this connector.

Theft Prevention Hole (Kensington)

Attach a key chain, etc. here to prevent the scanner from being stolen.

„Feed Selection Lever

„Front View (With the Document Feed Tray and Eject Tray Open)

Feed Selection Lever

Front Unit

Open when clearing paper jams and cleaning the scanner.

(See p.33 and p.65)

OPEN button

Use to open the front unit.

Extension Tray

Pull this tray out if the document hangs over the edge of the document eject tray.

Document Feeder Place the document to scan here.

Document Guides

Adjust these guides to fit the width of the document. (See p.21)

Document Eject Tray

Open this tray when you want to stack output documents.

Use this lever to change the way documents are fed. Push it up to feed documents one at a time (page separation mode) (See p.21). Push it down to feed documents that are fastened together, such as invoices, without separating them (bypass mode) (See p.23).

„Paper Eject Stopper

Paper Eject Stopper

Use the paper eject stopper that corresponds to the length of the documents you want to scan.

10

DR-2010C //DR-2510C