2

Register the job. For information on registering jobs, see Chapter 5, "Job

6

When scanning is complete, the image data is sent with the specified

Registration Tool Settings."

conditions.

NOTE

•You can register jobs from No. 01 to No. 10.

•The following jobs are registered in the job buttons by default:

c No. 01 Start: Performs scanning according to the application settings.

d No. 02 Stop: Stops scanning.

e No. 03 Save File: Saves the scanned image to a specified folder in a specified format.

3Click [Close] in the Job Registration Tool dialog box.

4Place the document (See "3. Placing Documents," on p. 21.).

5When you press the job button, the [Monitor for DR-2510C] or [Monitor for DR-2010C] dialog box is displayed, and scanning starts.

7Click [Close] in the [Monitor for DR-2510C] or [Monitor for DR-2010C] dialog box.

Using the Scan Panel

The Scan Panel is an application that is installed with the ISIS/TWAIN driver. It is displayed in the system tray when the DR-2010C/DR-2510C driver is started. If Feeding Option in the scan settings is set to [Panel-Feeding] or [Automatic Feeding], the Scan Panel will appear when you start scanning.

Scan Panel Functions

The Scan Panel has the following functions.

②

③

①

④

28

DR-2010C //DR-2510C