- [Skip Blank Page]

As each document page is scanned, the scanner detects whether it is blank, and if so, the image is not saved.

ySelecting [Skip Blank Page] enables the [Setting] button, which opens the [Blank Skip Setting] dialog box.

yAdjust the [Content density] setting in the [Blank Skip Setting] dialog box if blank pages are not skipped, or if non-blank pages are skipped.

yThe [Content density] setting should be adjusted according to the document content, so that only blank pages are skipped: increase the setting if they are not skipped, and decrease the setting if non-blank pages are skipped.

yThe Skip Blank Pages function may not work properly if the [Custom] setting is enabled in the [Gamma Settings] dialog box.

yIf a scanning side setting (simplex or duplex) is specified in the application settings, set [Simplex].

-[Folio]

Documents that are normally folded in half are scanned on both sides and composed into one image.

yYou cannot click [Folio] if you click [Patchcode] in the [Batch Separation] box of the [Others] tab.

Contents

Back

 

Previous Page Next Page

Correcting Image Skewing

This section describes the procedure for setting the scanner to detect slanted document pages and straighten the scanned images.

1In the ISIS/TWAIN driver properties dialog box, click the [Basic] tab → select the [Deskew] check box.

NOTE

Deskewing SWITCH also may not work properly or cause part of the image to be lost in other cases, depending on the document.

43

DR-2010C //DR-2510C