IMPORTANT
•When scanning multiple documents of different sizes, place the documents so that they cover the entire span of the feed rollers.
•It is recommended that documents exceeding LTR, 11.69" (A4, 297 mm) size are fed one sheet at a time.
•Scanning documents before the ink is dry can cause problems with the scanner. Always make sure that the ink on a document is dry before scanning it.
•Scanning documents that are written in pencil or similar material may make the rollers and scanning glass dirty, which can lead to smudges on the scanned image and transfer the dirt to subsequent documents. Always clean the internal parts of the scanner after scanning such documents.
•When scanning a
•Scanning the following types of documents can cause a paper jam or malfunction. To scan such a document, make a photocopy of the document and then scan the photocopy.
Wrinkled or creased |
|
|
| Carbon paper |
|
|
| ||
documents |
|
|
|
|
|
|
|
| |
Curled documents |
|
|
| Coated paper |
Torn documents |
|
|
| Extremely thin, |
|
|
|
| translucent paper |
Documents with paper |
|
|
| Documents with square |
|
| |||
clips or staples |
|
|
| holes punched |
|
|
| Back |
| ||
| Business Card |
|
|
| |
Size: | 1.97"x 2.12" (50 mm x 53.9 mm) or larger | |||
Paper weight: 140 lb bond (300g/m2) 0.0138" (0.35 mm) or less
IMPORTANT
If a stack of business cards cannot be fed properly, reduce the number of cards in the stack.
CardSize: 2.12" x 3.37" (53.9 mm x 85.5 mm) (ISO/JIS standard)
Card thickness: 0.03" (0.76 mm) or less
Orientation: horizontal feeding only Embossed cards can be scanned.
CAUTION
•If you place cards to be fed vertically, they may not be ejected properly, and cards that get jammed may be damaged when you remove them. Take care of the orientation when placing cards.
•Embossed cards may not be able to be scanned correctly, depending on the type of embossment.
19 |