Omitting a Specific Color

 

Enhancing the Red Color

This section describes the procedure for setting to omit borders and ruled lines

 

This section describes the procedure for setting the scanner to enhance the red

of a specified color (red, green, or blue) from the scanned image.

 

color when performing black-and-white scanning.

NOTE

If you select [24-bit Color] or [Auto Color Detection] from the [Mode] drop-down list in the [Basic] tab, you cannot specify this setting.

1In the ISIS/TWAIN driver properties dialog box, click the [Image processing] tab → select the color to omit from the [Front] and [Back] drop-down lists under Color drop-out, as necessary.

NOTE

You can specify different settings for the front and back side of the document.

NOTE

If you select [24-bit Color] or [Auto Color Detection] from the [Mode] drop-down list of the [Basic] tab, you cannot specify this setting.

1In the ISIS/TWAIN driver properties dialog box, click the [Image processing] tab → select [Red Enhance] from the [Front] and [Back] drop-down lists under Color drop-out.

NOTE

You can set specify different settings for the front and back side of the document.

50

DR-2010C //DR-2510C