NOTE

• When scanning folded documents, switch the feed selection lever to (Bypass).

• When placing folded documents, place the document into the scanner so that the fold is on the right side. The side of the folded document facing you will become the right side of the combined image.

• When scanning folded documents, click the [Basic] tab of the ISIS/TWAIN driver → click [Folio] in the [Scanning Side] box → click [OK].

(See Chapter 4, "ISIS/TWAIN Driver Settings.")

• The maximum size for the combined image is 11" X 17"/A3. When using the Folio function for an irregular document size, click the [Basic] tab of the ISIS/TWAIN driver → click [Auto-detection] in the [Page Size] box → click [OK].

Contents

Back

 

Previous Page Next Page

44..ScanningScanningMethodsMethods

When scanning with the DR-2010C/DR-2510C, in addition to scanning from an application, you can also use the Job function to perform scanning by pressing a scan button. This section describes the procedures for scanning using the CapturePerfect 3.0 software included with the scanner, scanning using the Job function, and other special scanning. For information on installing the various applications and drivers, see the Easy Start Guide, or Chapter 2, "Setup." For details on scan settings, see Chapter 4, "ISIS/TWAIN Driver Settings."

Scanning With CapturePerfect 3.0

This section describes how to start CapturePerfect 3.0, select the scanner, and scan documents.

The Scan Batch to File function is used here as an example.

For details, see the CapturePerfect 3.0 Operation Guide and CapturePerfect Online Help.

1From the Windows task bar, click [Start] → point to [All Programs] → [CapturePerfect 3.0] → click [CapturePerfect 3.0].

25

DR-2010C //DR-2510C