NOTE

If [Canon DR-2510C] or [Canon DR-2010C] is not displayed in the list of scanners, reinstall the ISIS/TWAIN driver. (See "Chapter 2 Setup - 2. Installing the Software," on p. 12)

4Select the default page size from the drop-down list → click [OK].

NOTE

•The [Configure Device Settings] dialog box is displayed only when you select [Canon DR-2510C] or [Canon DR-2010C] for the first time and click [OK], or when you click [Setup] for [Scanner Selection].

•The settings here are applied when you click the [Default] button on the ISIS driver properties dialog box.

•For a TWAIN driver, the default value is set to "LTR" and cannot be changed.

5From the [Scan] menu, select [Scanner Setting].

The ISIS/TWAIN driver properties dialog box is displayed.

Contents

Back

 

Previous Page Next Page

22..ISIS/TWAINISIS/TWAINDriverDriverPropertiesPropertiesDialogDialogBox Box

The ISIS/TWAIN driver properties dialog box is displayed when you select [Scanner Setting] on the [Scan] menu of CapturePerfect 3.0.

It consists of four tabs: the [Basic] tab, [Brightness] tab, [Image processing] tab, and [Others] tab.

Specify the settings on each tab as necessary to set the scanning conditions. For details on each setting, also refer to the Help.

[OK] button

Confirms the settings and closes the dialog box.

[Scan] button

For a TWAIN compatible application that can perform scanning from the properties dialog box, the [Scan] button is displayed instead of the [OK] button. Press the [Scan] button to scan with the displayed settings.

[Cancel] button

Cancels the settings and closes the dialog box.

[Default] button

Returns the settings to their default values.

[Help] button

Displays Help for the currently open tab or dialog box.

38

DR-2010C //DR-2510C