Chapter 1 Before Using the Scanner

1-3 Names and Functions of Parts

This section describes the name and function of each part. Make sure to read this section and familiarize yourself with the parts of the scanner before using the scanner.

Front View (Feed Tray Open)
Document Eject Tray Extension

Open if the document extends beyond the edge of the eject tray. (See p. 3-3.)

Document Feed Tray

Place the document to be scanned here. (See p. 3-3.)

Document Feed Tray Extension

Pull this tray out if the document hangs over the edge of the main tray.

(See p. 3-3.)

ControlsJob Buttons
Document EjectTray

Scanned documents are ejected here. (See p. 3-3.)

Document Guides

Adjust these guides to fit the width of the document. (See p. 3-6.)

These buttons can perform user-specified functions assigned with the Job Registration Tool. (See p. 3-9.)

Power Indicator

This indicator lights when the scanner is turned ON. (See p. 2-14.)

Feed Selection Lever

Use this lever to change the way documents are fed. Push it down ( ) to feed documents continuously (page separation mode.) (See p. 3-5.)

Push it up ( ) to feed documents one at a time or to feed documents that are fastened together, such as invoices, without separating them (bypass mode.) (See p. 3-7.)

Power Switch

This switch is used to turn the scanner ON. (See p. 2-13.)

1-7