Chapter 3 Basic Operation

2 Follow the procedure below to select the Canon DR-4010C Document Scanner as the scanner to be used.

1. On the [Scan] menu, click [Select Scanner].

2. Select [Canon DR-4010C] Æ click [OK].

Note

If [Canon DR-4010C] is not displayed in the list of scanners, re-install the ISIS/TWAIN driver. (See “2-3 Installing the Software,” on p. 2-4.)

3. Set the Default Page Size and click [OK].

Note

This dialog box is displayed only when you select [Canon DR-4010C] for the first time and click [OK], or when you click [Setup] for [Scanner Selection].

3-18