Chapter 3 Basic Operation
CAUTION
■Do not place the documents on top of the scanner to align them. Doing so may cause a malfunction.
■When placing documents into the feed tray, take care not to cut your hands on the edges of the paper.
3 Adjust the document guides so that they are wider than the document to be scanned.
4 Place the document face up into the feed tray, so that the leading edge of the paper touches the document stoppers.
IMPORTANT
There is a load limit mark ( ) on the document guides. Do not stack documents higher than this mark (approximately 100 sheets of 20 lb bond (80 g/m2) paper.) Doing so may cause a paper jam.