Chapter 3 Basic Operation

Scan Panel Functions

The Scan Panel has the following functions.

b

c

a

d

a Start button

If Feeding Option is set to “Panel-Feeding,” clicking this button starts scanning.

b Stop button

Stops scanning.

c Job display

When the Start and Stop functions are assigned to the job buttons, [Start] and [Stop] are shown here.

Note

If nothing is shown on the job display, the Start and Stop functions are not assigned to the job buttons. In this case, you should use the Start and Stop buttons on the Scan Panel.

d Batch separation button

After selecting [Panel] as the batch separation setting on the [Others] tab, if you enable batch separation from the application and start scanning, this button becomes active when scanning of the current document completes, and scanning stops.

When clicked, this button depresses and remains depressed while scanning with batch separation continues, until scanning of the current document completes, and scanning stops. The button then returns to normal.

3-22