Chapter 2 Setup

2-4 Connecting the Scanner to the Computer

There are two methods for connecting the DR-4010C scanner to a computer: USB connection, which makes use of a standard USB port on the computer, and SCSI connection, which makes use of a SCSI card installed in an expansion slot of the computer. Select the method that is suitable for your computer environment.

SCSI ID DIP Switches

Power Connector

USB Connector SCSI Connector (half-pitch 50-pin, pin-type)

CAUTION

Do not connect a USB cable and SCSI cable at the same time.

Using a USB Connection

1 Verify that the power switch of the scanner is OFF.

If the power switch is in the ON position, push the switch to set it to OFF.

Power switch

OFF position ON position

2 Plug the supplied power cord into the power connector on the back of the scanner. a

2-11